Little Mac Blowpipe Valve
VAT incl.: €16.80* VAT excl. : €14.12
Product information "Little Mac Blowpipe Valve"
The Little Mac Blowpipe valve is a reliable alternative to the traditional non-return flap. The valve is fitted to the end of the blowpipe. It is a three piece valve, with a replaceable rubber flap sandwiched in the middle. The valve is cone-shaped, allowing it to be easily inserted into the end of the blowpipe. It is easily removed for cleaning.
The LittleMac Valve is inserted into the end of the blowpipe, pushed in until it sits firmly. The diameter of the blowpipe may need to be slightly widened to accommodate the valve. This can be done using a reamer (see below).
Size (for bore): conical approx. 9.7 mm to 11 mm
This could also be of interest
The T-handle tapered reamer is used for widening the diameter of the blowpipe opening to accomodate a Little Mac valve. It can also be used to enlarged drone reed seats, should you have difficulty fitting certain drone reeds.Demonstartion video
Alternative manufacturer
The BandSpec Little Bagpipe Blowpipe valve is a reliable alternative to the traditional non-return flap. The valve is fitted to the end of the blowpipe. It is a three piece valve, with a replaceable rubber flap sandwiched in the middle. The Little blowpipe valve is cone-shaped, allowing it to be easily inserted into the end of the blowpipe. It can be easily removed and taken apart for cleaning. Size (for bore): conical approx. 9.7 mm to 11 mm