Le clapet BandSpec Little Bagpipe Blowpipe est une alternative fiable au clapet anti-retour traditionnel.La valve est montée à l'extrémité de la sarbacane. Il s'agit d'une valve en trois parties, avec un clapet en caoutchouc remplaçable au milieu. La valve de la sarbacane est de forme conique, ce qui permet de l'insérer facilement à l'extrémité de la sarbacane. Elle peut être facilement retirée et démontée pour être nettoyée. Taille (pour l'alésage) : conique d'environ 9,7 mm à 11 mm

The Little Mac Blowpipe valve is a reliable alternative to the traditional non-return flap. The valve is fitted to the end of the blowpipe. It is a three piece valve, with a replaceable rubber flap sandwiched in the middle. The valve is cone-shaped, allowing it to be easily inserted into the end of the blowpipe. It is easily removed for cleaning.The LittleMac Valve is inserted into the end of the blowpipe, pushed in until it sits firmly. The diameter of the blowpipe may need to be slightly widened to accommodate the valve. This can be done using a reamer (see below).Size (for bore): conical approx. 9.7 mm to 11 mm

Valve de replacement pour McCallum Folk Pipes

Valve de remplacement pour Hardie Blowpipe MaxiStick, AdjustiStick et FlexiStickPrix à l’unité

The "Big Mac" Valve - The big brother to the "Little Mac." A multiple function blowpipe valve; a one-way valve, water trap and air redirect. The Big Mac inserts into the bottom of the blowpipe stock (via zippered bag) and features an Airstream valve that is protected internally and is easily accessed for cleaning. The section inside the stock allows for moisture to collected and acts as a spit trap. The right angle forces air away from the pipe chanter reed delaying the time it takes for moisture to saturate the reed. A tube can be added to this valve for additional moisture control.

The Moose Blowpipe Valve locks in place very easily into the blowpipe stock using a tool provided with the valve. The valve can be fitted and removed at any time for cleaning or for when seasoning leather bags. The air flow through the valve is excellent, with no restriction. The valve is very well engineered using highly durable material.Due to its shape and positioning in the stock, the valve also acts as a spit trap. Condensation is caused when blowing air into the bag. The condensation collects around the wall of the stock and gets trapped between the wall of the stock and the tube of the blowpipe valve. All you need to do is remove your blowpipe, turn the blowpipe stock upside-down and pour out the spit. Very simple and very effective.approx. 12.5 mm diameterThe Moose Valve comes with a 2 year guarantee

La Valve Ross pour Blowpipe est facile à adapter dans le stock de votre Blowpipe Grâce a son joint en caoutchouc, elle adhère facilement au paroi de celui.ci et permet une étanchéité parfaitThe Ross Blowpipe Valve locks in place very easily into the blowpipe stock using a tool provided with the valve. The valve can be fitted and removed at any time for cleaning or for when seasoning leather bags. The air flow through the valve is excellent, with no restriction. The valve is very well engineered using highly durable material.Due to its shape and positioning in the stock, the valve also acts as a spit trap. Condensation is caused when blowing air into the bag. The condensation collects around the wall of the stock and gets trapped between the wall of the stock and the tube of the blowpipe valve. All you need to do is remove your blowpipe, turn the blowpipe stock upside-down and pour out the spit. Very simple and very effective.approx. 12.5 mm diameter

Clapet anti-retour en caoutchouc de rechange pour blowpipes McCallumCe clapet anti-retour de rechange est conçu spécialement pour les blowpipes McCallum, garantissant une étanchéité fiable. Il est compatible avec les modèles suivants :Blowpipes McCallum Standard en plastiqueBlowpipes McCallum UniversalBlowpipes McCallum Universal-ExpandableLe clapet mesure environ 20,5 mm (diamètre extérieur) et assure une fonction anti-retour efficace pour un flux d'air optimal.Instructions d’installation :Le remplacement du clapet est simple, mais la méthode de montage diffère selon le modèle de blowpipe. Regardez les vidéos ci-dessous pour un guide pas à pas :Remplacement du clapet – Blowpipe McCallum Universal / Universal-ExpandableRemplacement du clapet – Blowpipe McCallum Standard en plastiqueCe clapet garantit un flux d'air fluide et efficace, optimisant ainsi la performance de votre blowpipe.

Blowpipe-Rückschlag-VentilThe McCallum Blowpipe Valve is connected to the blowpipe-stock, from within the bag. It is a two piece valve, with a replaceable rubber flap. The valve is fitted with an o-ring for fast and easy installation. It is well build and durable.Due to its shape, the valve also acts as a spit trap. Condensation is caused when blowing air into the bag. The condensation collects around the wall of the stock and gets trapped between the wall of the stock and the tube of the blowpipe valve. All you need to do is remove your blowpipe, turn the blowpipe stock upside-down and pour out the spit. Very simple and very effective.How to install:The McCallum Blowpipe Valve comes fitted with an o-ring fitting. Simply push the valve into the stock.

Valve de remplacement pour Airstream

Cet outil est utilisé pour l'installation de la valve dans le Sutell. Le trou peut être agrandi légèrement pour avoir la forme conique de la valveLe collage de la valve n'est donc pas nécessaire et peut être enlever à tout moment. Fonctionne aussi bien sur ébène et plastique.

Valve de remplacement pourr Little Mac valveApprox. 1.5 cm diameter

For the great highland bagpipe.The traditional non-return valve is the most cost effective blowpipe valve available. It is made of neoprene material mounted to a metal tab. How to install:Size approx. 1.6 cm diametre. Price for valve only, without blowpipe.