Activated Alumina Beads for HR Moisture Control Systeml - 500 g
VAT incl.: €7.95* VAT excl. : €6.68
Available, delivery time: auf Lager
Product information "Activated Alumina Beads for HR Moisture Control Systeml - 500 g"
Activated Alumina Beads – Premium Desiccant for Bagpipe Moisture Control
Introducing our high-performance activated alumina beads, specifically designed to enhance moisture management in bagpipes. These beads serve as an efficient replacement for traditional silica gel, offering superior performance and longevity.
Key Features:
- Superior Moisture Absorption: Activated alumina boasts a higher moisture adsorption capacity than silica gel, ensuring optimal humidity levels within your bagpipes.
- Longer Lasting: Unlike silica gel, which tends to crumble and degrade over time, activated alumina beads maintain their structural integrity, reducing the frequency of replacements.
- Minimal Dust Generation: These beads produce significantly less dust compared to silica gel, minimizing the risk of dust-related issues within your reeds.
- Lower Heat Generation: Activated alumina generates less heat during moisture adsorption, reducing the risk of heat-related damage to sensitive components like chanter reeds.
- Extended Maintenance Intervals: Requires less frequent drying compared to silica gel, offering longer intervals between maintenance cycles.
- Non-Toxic and Safe: Free from hazardous additives like cobalt chloride found in some silica gels, ensuring safety for both users and instruments.
Compatibility:
These beads are suitable for use with various bagpipe moisture control systems, including:
- Ross Canister System
- Bannatyne Moisture Control System
- Highland Reeds Moisture Control System
- Shepherd Tone Enhancers
Product Details:
- Packaging: 500 g
- Usage: Typically, 100–200 grams are sufficient for one full system refill, providing ample supply for multiple maintenance cycles.
Upgrade your bagpipe maintenance routine with our activated alumina beads and experience enhanced performance and longevity.
Activated alumina beads can be regenerated and reused multiple times by heating. This process removes the absorbed moisture and restores their effectiveness.
- Temperature: 150°C to 200°C (302°F to 392°F)
- Duration: 2 to 3 hours
- Method:
- Spread the beads in a thin layer on a baking tray.
- Place them in a conventional oven (not a microwave).
- After drying, allow them to cool and store in an airtight container to prevent reabsorption of moisture from the air.
- Do not exceed 250°C (482°F), as this may damage the beads.
- Microwave ovens are not suitable for drying these beads.
The drying frequency depends on how often and in what conditions the bagpipes are used. Here are typical intervals:
| Usage Frequency | Drying Interval |
|---|---|
| Daily or long playing sessions | Every 1 to 2 weeks |
| Several times per week | Every 2 to 3 weeks |
| Occasional use (1–2 times per week) | Every 3 to 5 weeks |
| Stored, not used | Several months (if stored airtight) |
How to know when drying is needed:
- Reduced effectiveness – reeds or system become wetter than usual.
- Beads feel noticeably heavier than when dry.
- Musty or damp smell inside the case or canister.
- Visible condensation inside the system.
For best results, follow a regular drying routine. If possible, alternate between two sets of beads – one in use, one drying.